¼” X 1” Up-Spiral Flat Router Bit

$27
Excl. tax, plus shipping
  • Longer cutter length than our stock ¼” bit
  • Increased reach and bit stability in deeper cuts
  • Upcut geometry provides excellent chip extraction

Quantity:

Product ships in 2-5 days

Shipping cost and delivery options are calculate in the checkout. Delivery time and cost vary base on your location.

¼” X 1” Up-Spiral Flat Router Bit - SE1-2500-1000C

Product Overview

The ¼” x 1” Up-Spiral Bit has the same qualities as our stock ¼” cutter—including carbide composition, dual flute geometry, and compatibility with Origin’s ¼” collet—with the added benefit of a longer overall length and a longer cutting length for deeper passes and improved stability in deep cuts.

  • Overall Length: 2.5"

  • Shank Diameter: 0.25"

  • Cutter Diameter: 0.25"

  • Cutter Length: 1"

  • Geometry: Upcut, Spiral, 2 Flute

  • Material: Solid Carbide

Warning: Attention California residents www.P65Warnings.ca.gov

Frequently Asked Questions


Is this router bit compatible with Origin?

Yes, this bit will fit the ¼” collet that ships with Origin.

How deep can I cut in a single pass?

As a general rule of thumb for cutting wood, it’s best to never cut deeper than the diameter of the bit in a single pass. So for a ¼” bit, you should not cut deeper than ¼” in a single pass. Because every material is different, it’s best to perform test cuts to find the ideal pass depth and cut specs when working with a new material.

How can I maintain my cutters?

Resin, sap, and adhesives will build up on your cutter edge over time. This generates more friction on your cutter and accelerates edge degradation. Keep your cutters clean with a small brass brush, citrus cleaner and a rag.

What is the maximum cutting depth?

The ¼” x 1” Up-Spiral Router Bit can cut to a maximum depth of 1”.

Frequently Asked Questions