Software Updates
Origin's operating system is free and frequently updates.
USB downloadable updates are made available several weeks after being released for Wi-Fi installation. To get the latest updates as soon as they are available, connect your Origin to Wi-Fi. Major updates/features are released for Origin Gen1 and Gen2 simultaneously. Minor bug-fix releases sometimes only target Gen1 or Gen2, so the latest update version numbers for Origin Gen1 and Gen2 may not always be identical.
Larkspur
Version 5.1.4.0 (Gen2) 4.3.4.0 (Gen1) December 3, 2024
Unless otherwise noted, the below fixes apply to both Origin Gen1 and Gen2.
Resolved an issue affecting a small number of Origins that could result in a boot-loop after updating.
Resolved a rare bug that could cause Origin to crash when the vision system encountered an algorithmic corner case.
Resolved an issue where AutoPass would behave incorrectly when a high number of passes were used.
Improved consistency of end-of-cut behavior.
Minor language updates for clarity.
Larkspur
Version 5.1.3.0 (Gen2) 4.3.3.0 (Gen1) November 6, 2024
Probe Circle and Probe Rectangle Extensions
New Circle and Rectangle Probe extensions allow you to create geometry on Origin by probing objects directly. Accurately and easily center designs on dowels or rectilinear stock without having to measure and place designs.
Note: These Probing extensions are part of Shaper Labs and must be manually enabled in the settings menu.
Workspaces Become More Flexible
You can now Export your Workspace—including Grids—directly to Shaper Studio for detailed editing, then re-import to Origin. This allows you to start a project on Origin, then use tools in Studio for further design changes. When you’re done, import your file back to Origin and everything will line up perfectly.
You can also now import a Workspace. This acts like a “copy and paste” between projects. Create a tenon on Workstation, then import that file onto Plate for the mortise without having to recreate all the shapes.
AutoPass Updates
Pocketing cuts are now available with AutoPass — set your depth, and Origin makes stepped passes down to your desired depth. You choose when to plunge to the next depth by clicking the green button.
Open paths are also now supported with AutoPass, making it easy to make deeper engravings that require multiple passes.
Internet Connectivity
Origin will now alert you when you are having trouble accessing Shaper services, which could cause failures when importing files or downloading new updates.
Unless otherwise noted, the below fixes apply to both Origin Gen1 and Gen2.
(Gen 2) You can select a Wi-Fi compatibility mode in Settings that will make Origin prefer 2.4GHz networks - try this if you are having Wi-Fi connectivity problems.
Simplified experience when you create a Scan with accuracy issues
Fixed issue where Origin would lose connection to internet after ~15 minutes
Fixed an issue where screen would freeze for a split second while cutting
(Gen 2) Fixed Z-touch Issue where sometimes it would fail repeatedly until unit is rebooted
Improved speed on Wi-Fi settings page when lots of networks are available
Open networks are now remembered after reboot
Allow sign out of shaper account regardless of Wi-Fi status
Hovering a guide will not update tools cut depth when AutoPass is on
Fixed an issue that could cause the import screen to fail to load when you’ve recently switched Wi-Fi networks.
Boot-Up animation updated
Increased max roughing offset to half of bit diameter for AutoPass
Fixed issue where sometimes Origin would crash starting an AutoPass cut
Shaper Connected Caliper now connects to Origin much faster
Increase duration of checkmark display after completing z-touch.
Fixed a rendering error that could occur after a failed scan
Cosmetic fixes to region selection
Reduced lag when cutting complex files with Autopass
Kirby Cove
Version 4.0.8.0 - November 13th, 2023
Connected Caliper
Kirby Cove introduces support for a new accessory for Origin: The Shaper Connected Caliper! The Shaper Connected Caliper enables you to measure and wirelessly transmit stock dimensions, cut depths, and more to your Origin with the tap of a button.
Slot Tool
Now you can create slot shapes directly on Origin. Simplify your on-tool designs of mortises, dados, and other common joinery.
Polygon Tool
Origin now supports creating regular or irregular polygon shapes with up to 20 sides. Create polygons with up to 20 sides directly on the tool.
Delete All Workspaces
You asked and we listened! You can now delete all your Workspaces with a single click. While not required, you may decide to start fresh, or just get rid of a bunch of unused workspaces.
Unless otherwise noted, the below fixes apply to both Origin Gen1 and Gen2.
Improved handling of ShaperHub login state when browsing files
Fixed some internationalization discrepancies throughout the UI
Fixed an issue where certain supported countries could not be selected in the region selection screen
Resolved an issue that could cause Origin to forget its Wi-Fi connection between reboots and/or after a system update
Improved UI snappiness on multiple screens
Fixed an issue that could result in some compound shapes being uncuttable when using Autopass
No longer prompt users to try a free trial of Autopass if they have already paid for the full version
(Gen1) Resolved an issue that could rarely cause Gen1 tools to run hotter than expected while idle
(Gen1) Resolved an issue that could, in extremely rarely cases, cause the Gen1 on-screen interface to spontaneously crash and auto-reload while idle
(Gen1) Implemented an improved factory-reset behavior capable of resolving a wider range of error states automatically
(Gen2) Improved speed and connection stability of both 2.4GHz and 5GHz Wi-Fi networks, particularly in Europe
(Gen2) Improved power-on Z-Axis homing behavior
(Gen2) Fixed an issue that could cause visual artifacts to appear on the touchscreen of a small number of Gen2 units
Minor other bug fixes and improvements
Jenner
Version 3.7.20.0 - June 27th, 2023
Unless otherwise noted, below fixes apply to both Origin Gen1 and Gen2.
Updated logging service to prevent interruption to log data caused by a third-party service change
Improved handling of AutoPass free-trial when connected to certain Wi-Fi networks
Resolved an issue where a purchased AutoPass extension would sometimes fail to function when not connected to Wi-Fi
Version 3.7.18.0 - May 14th, 2023
AutoPass Free Trial
A 14 day free trial is now available for every Origin. This gives you full access to the feature for 14 days where you can test out the features and get a feel for how AutoPass works. The trial does not require a credit card up front and has all the features of AutoPass.
Unless otherwise noted, below fixes apply to both Origin Gen1 and Gen2.
Fixed an issue where some compound shapes could cause climb cuts
Assorted Bug Fixes
Version 3.7.13.0 - December 7th, 2022
Unless otherwise noted, below fixes apply to both Origin Gen1 and Gen2.
Fixed some incorrectly translated language in the UI
(Gen2) Improved thermal performance
Fixed a rare issue that could cause some tools to fail to update from Inverness to Jenner
(Gen1) Improved functionality of system recovery options
Version 3.7.9.0 - November 21st, 2022
Unless otherwise noted, below fixes apply to both Origin Gen1 and Gen2.
(Gen1) Fixed a rare issue that could cause some tools to fail to touch off successfully
(Gen1) Fixed a rare issue that made it difficult to enter auto-locked mode with a double click on certain tools
(Gen1) Fixed a regression introduced in 3.7.7.0 in which a tiny offset (approximately the thickness of two human hairs) was applied to the z-axis touchoff zero position
(Gen1) Fixed a boot screen visual styling regression introduced in 3.7.7.0
Version 3.7.7.0 - November 21st, 2022
Manual Z-Touch
It’s now possible to manually calibrate Origin’s Z-Axis zero-height before cutting by lowering/raising the spindle with the buttons on the handles.
Manual Z-Touch is the best way to calibrate Origin’s z-axis zero-height when using fine router bits with small diameters (e.g.engraving bits), and/or when working with soft surfaces like cork or foam.
Encoded Depth
Assign depths to individual paths in your Workspace so you don’t accidentally cut deeper than you intended.
Helpful icons/warnings appear in Origin’s Cut Mode UI so you can keep track of your Encoded Depths.
A warning will prevent you from accidentally cutting deeper than a path's Encoded Depth. Optionally bypass this warning.
Unless otherwise noted, below fixes apply to both Origin Gen1 and Gen2.
Optimizations to system performance
Improved readability of certain modals
Language and translation improvements throughout UI
Added Encoded Depth for Box Joint Basic when created on tool
(Gen2) Improved hardware fault detection and fixed a rare issue in which a motor fault could be reported when one did not actually occur
Added QR codes throughout UI which conveniently link to helpful information on shapertools.com
Now cache toolpaths for specific bit diameter and offset combos
Added quick guides for learning about new features
Fixed assorted, rarely-occurring application crashes
Wi-Fi networks can be selected and connected to from the system recovery screen
(Gen2) Improved handling of jammed Z-Axis (i.e. with wood or shipping lock)
Improved resilience of Wi-Fi connectivity in certain conditions where it previously would not reliably connect
Inverness
Version 3.3.16.0 - July 19th, 2021
Minor system stability improvement
Version 3.3.15.0 - July 15th, 2021
Position
It’s now possible to quickly lock an object in a precise location by entering dimensions relative to your Grid’s (X,Y) axes.
You can use the Calculator’s operation keys (+, -, x, /) to reposition an object relative to its current location.
Lock one axis numerically, then physically move Origin to adjust your object’s position along the unlocked axis.
A new X,Y marker shows the orientation of your grid’s X,Y axes to keep you oriented as you move Origin around your workspace.
Import/Copy Mode Improvements
When copying objects, the copied object will be overlaid on top of the original object. If you move Origin by a small amount, your copied object will detach from the original object and follow Origin’s reticule as you move.
The bounding box which surrounds your object now respects the actual extent and orientation of your object.
With the bounding box changes, scale is unaffected by rotation and is an accurate representation of the object's size.
A new Mirror function within the Scale Menu allows you to flip your objects horizontally or vertically.
In a workspace which contains a Grid, rotations are based on your Grid axes. 0 degrees will be aligned to your (X,Y) axes. In a workspace which does not contain a Grid, rotations are based on the orientation of Origin. 0 degrees will always be horizontally aligned to your screen.
Rotation values are saved when you place an object. You can return to this object later to make rotational adjustments.
The anchor point selector now reflects the orientation of your object in the workspace, making it easier to select the correct anchor.
Custom Anchors
Custom Anchors give you greater control over the placement of imported objects than is offered by Origin’s standard nine-point anchor system.
Add a custom anchor to your design in your chosen software by creating a red right-angled triangle. The right angle vertex defines the location of the anchor point. The shorter leg of the right angle defines the X-axis and the longer leg defines the Y-axis.
Zoom Overhaul
You can now pinch to zoom in Scan Mode, Design Mode, and Cut Mode.
Scan Mode, Design Mode, and Cut Mode all have different default zoom levels to give you the best view for the operations you will typically perform within each Mode.
Design Mode remembers your most recent zoom level.
Performance and interaction improvements have been made to the zoom slider.
Pocket Cutting Refinements
It’s easier to control Origin while pocketing. Unexpected cutter movement has been eliminated and the overall experience is much more predictable.
Wi-Fi connection improvements have been made for tools which may have previously experienced issues
Improved touchscreen accuracy and responsiveness on tools that may have previously experienced degraded touchscreen performance
Rename a workspace quickly from within Scan Mode
Processing for fractional offsets is much faster
Attempting to modify the path type of an open path will trigger an error message
Resolved a bug when creating rectangles with negative dimensions
Shaper can now offer Remote Support to Origin owners whose tools experience software issues
Origin now adjusts for small lateral movements made by the user while plunging/retracting
Origin’s sidebars become transparent while cutting to give you a larger view of your workspace
Imported shapes default to the center anchor point
Humboldt
Version 3.2.22.0 - May 22nd, 2020
Fixed a stability issue that affected some units
Version 3.2.21.0 - May 20th, 2020
Grid Creation and Use
It is now possible to grid from any edge of your workpiece.
Grids can now be created using a “center point” Y-Axis.
Existing grids can now be easily modified.
You can now select which edge of the probe bit to register off of.
Workspaces
The Workspace selection UI has been overhauled.
You can now rename, duplicate, sort, and search for Workspaces.
The Workspace selection interface now enables you to quickly identify Workspaces that incorporate ShaperTape currently within Origin’s camera view.
Switch to Workspace: You can automatically switch Workspaces mid-session by simply pointing Origin at a previously-scanned Workspace
Complex File/Scan Enhancements
Origin can now handle more complex files.
There is now better messaging through the UI to show when Origin is processing (for example, when computing an offset on a complex shape).
Origin’s on-screen keyboard is now more responsive
The Text Basic Extension now includes a much larger selection of characters
Origin now supports files created by Vectr.com
Guides are now always selected last when in cut mode
Improvements to internationalization have been implemented throughout the UI
The Wi-Fi selection screen will now tell you if no compatible networks are in range
Origin is now more resistant to rare file corruption failures
Several rare software crashes that previously caused Origin’s UI to freeze have been resolved
Minor security patches have been applied to Origin’s OS
Golden Gate
Version 3.0.26.0 - January 28th, 2020
Fixed a motor control bug that affected some Origins
Version 3.0.24.0 - January 20th, 2020
Improved Z-Axis motor retraction behavior and fault handling capabilities
Fixed a bug that could result in the UI becoming unresponsive
Fixed a font kerning issue with the “W” character in the “Text basic” extension
Version 3.0.20.0 - November 18th, 2019
Fixed minor scanning visualization artifact
System stability improvements
Version 3.0.4.0 - October 2nd, 2019
Minor motor control subsystem bug fixes
Placing a file in an unknown workspace will no longer cause Origin’s software to crash
Version 3.0.0.0 - September 25th, 2019
Box Joint Basic Extension
Make box joints with ease on-tool—no computer or physical templates required! Input your parameters and Origin will automatically generate the cut paths for both sides of a box joint.
Text Basic Extension
Adding single-line text to your next project is now a breeze. Just type in your text and Origin will automatically generate an engraveable cut path.
Improvements to internationalization throughout the UI
Pinch-to-Zoom now works while placing objects designed on-tool
Improved robustness of Origin’s motor control software systems
Elimination of the cause behind several rare software crashes
Improved thermal management by better detection of system idle states
More intuitive software update flow and notifications
Fixed an issue where copied objects could exhibit a scaling discrepancy
Fixed some rare software crashes that could result in a “recovery loop”
Fixed a bug where the update progress bar could sometimes behave erratically
Minor security patches
On-Tool account creation provides more useful error messages on failure
Fillmore
Version 2.6.26.0 - April 11th, 2019
Auto-Lock Mode
It is now possible to “lock” origin into Auto mode (with a chosen feedrate) by double-clicking the green button at the start of a cut.
Improved File/Folder Navigation
Origin’s design import menu now remembers where you left off to make your design process faster.
Support for Single Line Font SVGs
Origin will now properly understand SVGs that were created from single line fonts and allow them to be engraved.
Improved responsiveness of plunge stop when creating a grid
Fixed a software crash that can occur when leaving Origin idle for a long time
It is now possible to mirror a design on-tool by entering a negative scale value
Grid tool now properly treats probe diameter as different from tool diameter
User will be reminded if a scan is “low accuracy” on each load of that workspace
Fixed several rare issues that could cause Origin to hang or crash when working with complex files
Fixed several software crashes that could be caused by placing certain design files
Origin now boots to a usable state faster after a software update has occurred
Various error messages have been improved to better recommend corrective actions
Users are now prompted to retry Z-Touch after it is prevented due to the spindle being on
Origin’s Wi-Fi MAC address is now shown on the Info page in the Settings menu
Changed out-of-box cut settings to default to aircut depth
Fixed an issue that could cause factory resets to fail on Origins with a lot of saved workspaces
Emeryville
Version 2.5.5.0 - December 10th, 2018
Improvements to Onboard Keyboard
Origin’s new keyboard now supports a wider variety of special characters.
When using the keyboard, users can now use a magnifier tool to ensure that they are entering their intended letters, numbers and characters.
Low Accuracy Scans
When a user creates a Low Accuracy Scan, Origin will notify the user and then give the user the option to use this Low Accuracy Scan or to create a New Scan. Note: for most accurate results, we recommend performing a New Scan instead of using a Low Accuracy Scan.
Multilingual and Multi-Region Support
Users can now interact with Origin in French or German, in addition to English.
To change your tool’s language or region settings once you have installed Emeryville, go to: Settings ⇒ Info ⇒ Language/Region.
Fixed bug that was preventing some users from logging into ShaperHub on Origin
Addressed issue that forced users to power cycle after deleting all their workspaces
Improved spindle power state detection during Z-touchoff and cutting
Improved error messages and better onboarding experience
Dolores
Version 2.4.10.0 - October 1st, 2018
Fast Retract
Origin will now retract the spindle quickly when finishing a cut or going out of bounds to save you time when cutting projects with lots of paths
Enhanced Pocketing
In Castro, you could only start a pocket on its edges. Now, you can start a pocket cut from anywhere inside of the shape.
Enhanced Path Selection
When multiple paths are underneath the range circle, a Select button will appear in Design and Cut. Tapping Select will allow you to select precisely the path you want.
Hold down the Select button to see which paths can be switched to.
Zoom during place
See your workpiece up close so you can more precisely place designs
Enhanced Path Visuals
Selected paths are much more obvious, now rendered in a thicker, more contrasting color (green).
Nearby paths show the area that will be cut so that you can see where paths may overlap.
Sticky anchor point type
When placing or copying designs, your last-used anchor point type (Top left, Middle, Bottom right, etc) will be saved and used the next time you place or copy.
Improved Software Update experience
You’ll be notified when there’s an update available, and have up to 5 days to install, so you can get the latest software on your schedule.
Revised tool settings so you can see critical information at a glance
Moved ‘erase cuts’ button to a more deliberate on-screen location
Significant improvements to SVG parsing and rendering
Touch screen performance improvements
Performance and efficiency improvements (may result in reduced tool temperatures)
Castro
Version 2.3.10.0 - June 28th, 2018
New “Add to Scan” mode replaces “Update Scan”
The 'Add to Scan' allows users to make changes on their workspace (adding ShaperTape, inserting guide marks, etc.) and seamlessly incorporate this information into their original scans
Version 2.3.6.0 - May 1st, 2018
Helix Mode
Cutter is now able to move automatically in a controlled helical descent to a specified depth.
Helix mode becomes available for Inside paths that are smaller than the corrective range.
Plunge and Auto Speeds Adjustment
Cutter is now able to move automatically in a controlled helical descent to a specified depth.
Tool will plunge at regular speed until reaching ‘Aircut’ height (just above your workpiece).
Calculator
Number entry now includes mathematical operators.
Can more easily input fractions in bit size and cut depth.
Grid tool improvements
Plunge to your desired probe depth without performing Z-Touch first.
A bit diameter can be specified for grid that does not affect your current cut settings.
Fixed issues that could lead to unintended cuts
Improved visual representation for already cut depths
Improved time required to process scans
Improved time required to place designs
Added ability to set anchor points when creating rectangles and circles on tool
Improved overall stability
Improved touch screen responsiveness
Changed background color of unscanned areas allowing to see placed designs
Updated some icons and illustrations
Berryessa
Version 2.2.3.0 - January 29th, 2018
Grid Tool
Users can now create a grid on their workpiece to ensure accuracy when placing designs from SVGs and creating designs using on-tool CAD.
Design Place and Copy
Designs created on-tool can be copied, rotated, and locked to specific grid coordinates
Import Browser
The file import screen now displays thumbnails and is sortable via file name or last-modified date
Pen Tool Expansion
The Pen Tool can now be used to create open shapes
Increased stability when performing larger scans
Can now remove Wi-Fi networks
Alameda
Version 2.1.13.0 - December 7th, 2017
Improved handling of SVG files
Origin is now better able to parse a wide variety of SVG files, giving users more freedom when designing files
Folder support for USB disks
Users can navigate among folders when importing files from a USB drive
Show tape health indicator in Design mode
The 'tape health indicator' tracks how much scanned ShaperTape is within the tool's field of view at all times
Updated cut presets
Offset and cut depth presets allow for easy adjustments to cut specs in between passes
Warn when spindle is off and Start Cutting is tapped
A reminder notification alerts the user
Improvements for switching between multiple WiFi networks
Version 2.0.2.0 - November 7th, 2017
Scan Tool
Scan a workspace
Update workspace (to add new tape)
On startup, Auto-Return to workpiece
Select a previous workspace
Delete old workspaces
Design
Place a SVG transferred via USB
Place a SVG transferred via ShaperHub
Add a grid with spacing (⅛”, ¼”, ½”, 1”)
Create a rectangle
Create a rectangle with manually entered dimensions
Create a rectangle with rounded corners
Create a circle
Create a circle with manually entered diameter
Use Pen tool to create closed shapes
Remove designs from workspace
Cut
Set size of bit (Custom or standard presets)
Set cut type (Inside, Outside, Online, Pocket, or Guide)
Set cut depth (Custom or standard presets)
Set cut offset (Custom or standard presets)
Automatic Z touch off
Automatically change cut type based on SVG colors
Erase cut history
Tape indicator to show tape health
Settings
Set up WiFi
Login/Logout with your Shaper Account
Create a Shaper Account
Change default units (in. or mm.)