Push Sticks

Created By Stilwell | March 27th, 2019

uploaded project image
project image thumbnail
project image thumbnail
project image thumbnail
Three different styles of push sticks for all your pushing needs.

10 min



Jigs & Fixtures

1 kB
1 kB

-1/2" or 3/4" plywood -Double Sided Tape -Sandpaper -1/4" bit -Round-over bit (optional)
-Shaper Origin -Trim Router (optional)
1. Choose which push stick you want or cut all three. 2. Use double sided tape to hold pieces down. 3. Apply Shaper tape. 4. Place files and cut at appropriate depths and offsets. 5. Optional: use round-over bit for the handles. 6. Sand and Enjoy!

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license