Leaf-Shaped Serving Board

- 1" thick walnut was what I used for the board in the pictures but you could use any wood of any thickness that you want. - 1/4" bit - food-safe finish

-Shaper Origin -sanding paper

These instructions are for cutting from a 1" thick board like I used. If you are using another thickness of board or bit adjust your cut depths accordingly. 1. Place design 2. Cut the hole first and then cut the outline of the board. Cut everything in the following passes: - 0.05" offset, 1/4" depth - 0.05" offset, 1/2" depth - 0.05" offset, 3/4" depth - 0.05" offset, 1" depth - 0 offset, 1" depth 3. Sand & finish with a food safe finish.