Book Rack

Created By Nelson | October 26th, 2018

uploaded project image
project image thumbnail
project image thumbnail
project image thumbnail
project image thumbnail
Arts & Crafts book rack.

1 hr

Intermediate

Category

Furniture

NameSize
Arts-Crafts Book Rack Model.svg
3 kB
Tenon A.svg
1 kB

Hardwood lumber of choice (approx. 11 board feet, minimum)
Shaper 1/4" Cutter Block Plane
For this project, all panels and shelves are milled ¾” thick. You’ll need to create two panels 12” wide x 30” tall from which to cut the side panels from. The four upper shelves are 4” wide by 32” long (a 1” tenon will be cut so the distance between the side panels will be 30”). The bottom shelf is also 32” long (including the 1" tenons) and its width is 10”. A nice touch is to chamfer the tenons with a block plane before gluing them in place. While I’ve included the files for the tenons, I cut them in the traditional manner as I have yet to build a vertical workstation; I’m assuming they work, but they have not been tested.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license