Vacuum Hose Wire Clip

Created By Brock | March 23rd, 2019

uploaded project image
project image thumbnail
project image thumbnail
A clip to hold your Origin power cable in line with your vacuum hose while you work, yet is easily unclipped to allow use of the vacuum by itself.

10 min

Easy

Category

Storage & Organization

NameSize
VAC HOSE WIRE CLIP 29mm.svg
1 kB
VAC HOSE WIRE CLIP 30mm.svg
1 kB

1/2" plywood or material of your choice
An appropriate cutting bit for your chosen material.
Measure the outside diameter of your vacuum hose and select the size of clip just smaller than it. For example, the hose that ships with Origin measures about 30.5mm so the 30mm clip should work well with it. A 48mm clip works well with a 1.5" ShopVac hose (their naming convention, not the actual outer diameter). Cut one or more clips and install them on your vacuum hose. You can leave the clips attached to the vacuum hose while still easily securing and loosening Origin's power cable.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license