"Winner" cleat hook

By shaperilio | Created January 8th, 2019 | Published January 8th, 2019

uploaded project image
project image thumbnail
Dead simple hook for clothing / bags / kids in suspenders. I took the cleat-end of these straight out of "Cleat of the Week 7: Hammer Rack" https://www.shapertools.com/hub/creators/5b437481a92ce901517c0655/shares/5b034254fc3516000f72d706 2 hooks in the design file; nested to save some wood.

10 min

Easy

1

Category

Cleats

NameSize
cleat hook.svg
2 kB

Wood. The thinner it is, the more likely the hooks will flop around. Can easily be glued together if it becomes an issue.
Shaper Origin
The space between the hook on and the cleat can be used to jam a piece of rubber tubing (or similar) to help keep the hook in place when removing items. If you have some thicker stock around, consider making some cleat cam locks: https://www.shapertools.com/hub/creators/59bbcf2b291ebbfa71254b59/shares/5c412b382800470017e9580a

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license