Simonswerk Tectus TE 240 3D N Hinge

By Shawn | Created July 9th, 2019 | Published July 9th, 2019 | Updated August 8th, 2019

uploaded project image
project image thumbnail
project image thumbnail
project image thumbnail
project image thumbnail
Adjustable hardware insert for heavy/large doors.

10 min

Easy

2

Category

Hardware Inserts

NameSize
Tectus_Door_v02.svg
3 kB
Tectus_Frame_v04.svg
1 kB

8mm Collet (optional) Bit with 27 mm travel
Files for installing a Tectus door hinge. This is a adjustable hinge ~3mm in each direction and is common for large doors. NOTE: there are 2 seperate files and each have different depths Follow instructions on website for offsets from edge, likely you will need to modify depending on your specific setup I converted the DXF's from the webpage below into SVG format using Illustrator. Reference Webpage: https://www.simonswerk.us/productselector/ps/Modell/show/te-240-3d-n.html

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license